Tin can luminaries are a fun, easy craft project for all ages.

They are great for any holiday and only limited by your

imagination! You can transfer any simple shape onto a tin can to

create a beautiful candle holder for any occasion.

I chose to make luminaries for Christmas this year. You can

choose any simple design to transfer onto your tin can. I used a

favorite clip art program on my computer to look for easy

Christmas designs to print out. I chose a Christmas tree, a

snowman, and a pair of gingerbread men.

Here’s what you need to get started:

- Empty tin cans (washed and labels removed)
- Design to transfer onto can
- Hammer
- Large nail
- Tape
- Dish towel

It is easiest to punch the holes in your tin can if you freeze

some water in it first. Fill the can with water, leaving 1/4

inch space at the top for the ice to expand. Place in freezer

until frozen. Your can may bulge a little at the bottom while in

the freezer, but after you remove the ice you can use the hammer

to flatten out the bottom of the can.

You might want to freeze a couple more cans then you think you’ll

need in case you make a mistake and have to start over again.

After the ice has frozen, take the tin can from the freezer and

tape your design to the can. I used packing tape, but you can

also use duct tape. The tape won’t stick to the cold can, but

you can wrap the tape all the way around the can so it will stick

to the paper.

If you don’t have a design on paper, you can also draw a design

on the can freehand with a permanent marker. You can also just

punch the design freehand without drawing it first.

Lay the can on a folded dish towel so the towel will catch the

ice chips that try to escape. It will also hold the can in

place. Using the hammer and nail, tap holes around the border of

your design, trying to punch holes evenly and not too close

together. You want a simple design so that when you see only the

holes in the can you will be able to tell what it is!

After punching the holes, remove the paper and tape and admire

your design. It is really so easy! If you plan to hang your

luminary, also punch two holes at the top of the can. You can

make a handle out of wire (from a craft store) or a wire coat

hanger.

Place the tin can under running warm water to melt the ice. Dry

the can with a towel and place a votive candle in the bottom.

You will need a long lighter or match to light the candle.

To further decorate your tin can luminary, you can spray paint

the can any color you wish. Be creative!

This is a great family project. Just make sure kids have adult

supervision while using the hammer and nails. Have fun!

Photos of project:

http://www.crafty-moms.com/tin-can-luminary.shtml

Translucent Candle Holders $8 Bring some sunshine and light into any room with our attractive Translucent Candle Holders. Perfect for either a 15 hour votive or standard tealight (not included). These make a great accessory to any holiday dinner. Purchase one of each size for a great table display. Sold Individually.

Translucent Candle Holders $9 Bring some sunshine and light into any room with our attractive Translucent Candle Holders. Perfect for either a 15 hour votive or standard tealight (not included). These make a great accessory to any holiday dinner. Purchase one of each size for a great table display. Sold Individually.